This is follow-up work to the ResNets paper. It studies the propagation formulations behind the connections of deep residual networks and performs ablation experiments. A residual block can be represented with the equations $y_l = h(x_l) + F(x_l, W_l); x_{l+1} = f(y_l)$. $x_l$ is the input to the l-th unit and $x_{l+1}$ is the output of the l-th unit. In the original ResNets paper, $h(x_l) = x_l$, $f$ is ReLu, and F consists of 2-3 convolutional layers (bottleneck architecture) with BN and ReLU in between. In this paper, they propose a residual block with both $h(x)$ and $f(x)$ as identity mappings, which trains faster and performs better than their earlier baseline. Main contributions:

- Identity skip connections work much better than other multiplicative interactions that they experiment with:
    - Scaling $(h(x) = \lambda x)$: Gradients can explode or vanish depending on whether modulating scalar \lambda > 1 or < 1.
    - Gating ($1-g(x)$ for skip connection and $g(x)$ for function F):
    For gradients to propagate freely, $g(x)$ should approach 1, but
    F gets suppressed, hence suboptimal. This is similar to highway
    networks. $g(x)$ is a 1x1 convolutional layer.
    - Gating (shortcut-only): Setting high biases pushes initial $g(x)$
    towards identity mapping, and test error is much closer to baseline.
    - 1x1 convolutional shortcut: These work well for shallower networks
    (~34 layers), but training error becomes high for deeper networks,
    probably because they impede gradient propagation.

- Experiments on activations.
    - BN after addition messes up information flow, and performs considerably
    worse.
    - ReLU before addition forces the signal to be non-negative, so the signal is monotonically increasing, while ideally a residual function should be free to take values in (-inf, inf).
    - BN + ReLU pre-activation works best. This also prevents overfitting, due
    to BN's regularizing effect. Input signals to all weight layers are normalized.

## Strengths

- Thorough set of experiments to show that identity shortcut connections
are easiest for the network to learn. Activation of any deeper unit can
be written as the sum of the activation of a shallower unit and a residual
function. This also implies that gradients can be directly propagated to
shallower units. This is in contrast to usual feedforward networks, where
gradients are essentially a series of matrix-vector products, that may vanish, as networks grow deeper.

- Improved accuracies than their previous ResNets paper.

## Weaknesses / Notes

- Residual units are useful and share the same core idea that worked in
LSTM units. Even though stacked non-linear layers are capable of asymptotically
approximating any arbitrary function, it is clear from recent work that
residual functions are much easier to approximate than the complete function.
The [latest Inception paper](http://arxiv.org/abs/1602.07261) also reports
that training is accelerated and performance is improved by using identity
skip connections across Inception modules.

- It seems like the degradation problem, which serves as motivation for
residual units, exists in the first place for non-idempotent activation
functions such as sigmoid, hyperbolic tan. This merits further
investigation, especially with recent work on function-preserving transformations such as [Network Morphism](http://arxiv.org/abs/1603.01670), which expands the Net2Net idea to sigmoid, tanh, by using parameterized activations, initialized to identity mappings.

FaceNet directly maps face images to $\mathbb{R}^{128}$ where distances directly correspond to a measure of face similarity. They use a triplet loss function. The triplet is (face of person A, other face of person A, face of person which is not A). Later, this is called (anchor, positive, negative).

The loss function is learned and inspired by LMNN. The idea is to minimize the distance between the two images of the same person and maximize the distance to the other persons image.

## LMNN

Large Margin Nearest Neighbor (LMNN) is learning a pseudo-metric

$$d(x, y) = (x -y) M  (x -y)^T$$

where $M$ is a positive-definite matrix. The only difference between a pseudo-metric and a metric is that $d(x, y) = 0 \Leftrightarrow x = y$ does not hold.

## Curriculum Learning: Triplet selection

Show simple examples first, then increase the difficulty. This is done by selecting the triplets.

They use the triplets which are *hard*. For the positive example, this means the distance between the anchor and the positive example is high. For the negative example this means the distance between the anchor and the negative example is low.

They want to have

$$||f(x_i^a) - f(x_i^p)||_2^2 + \alpha < ||f(x_i^a) - f(x_i^n)||_2^2$$

where $\alpha$ is a margin and $x_i^a$ is the anchor, $x_i^p$ is the positive face example and $x_i^n$ is the negative example. They increase $\alpha$ over time. It is crucial that $f$ maps the images not in the complete $\mathbb{R}^{128}$, but on the unit sphere. Otherwise one could double $\alpha$ by simply making $f' = 2 \cdot f$.

## Tasks

* **Face verification**: Is this the same person?
* **Face recognition**: Who is this person?

## Datasets

* 99.63% accuracy on Labeled FAces in the Wild (LFW)
* 95.12% accuracy on YouTube Faces DB

## Network

Two models are evaluated: The [Zeiler & Fergus model](http://www.shortscience.org/paper?bibtexKey=journals/corr/ZeilerF13)  and an architecture based on the [Inception model](http://www.shortscience.org/paper?bibtexKey=journals/corr/SzegedyLJSRAEVR14).

## See also

* [DeepFace](http://www.shortscience.org/paper?bibtexKey=conf/cvpr/TaigmanYRW14#martinthoma)

This paper builds on top of a bunch of existing ideas for building neural conversational agents so as to control against generic and repetitive responses. 

Their model is the sequence-to-sequence model with attention (Bahdanau et al.), first trained with the usual MLE loss and fine-tuned with policy gradients to optimize for specific conversational properties. Specifically, they define 3 rewards:

1. Ease of answering — Measured as the likelihood of responding to a query with a list of hand-picked dull responses (more negative log likelihood is higher reward). 
2. Information flow — Consecutive responses from the same agent (person) should have different information, measured as negative of log cosine distance (more negative is better).
3. Semantic coherence — Mutual information between source and target (the response should make sense wrt query). $P(a|q) + P(q|a)$ where a is answer, q is question.

The model is pre-trained with the usual supervised objective function, taking source as concatenation of two previous utterances. Then they have two stages of policy gradient training, first with just a mutual information reward and then with a combination of all three. The policy network (sequence-to-sequence model) produces a probability distribution over actions (responses) given state (previous utterances). To estimate the gradient in an iteration, the network is frozen and responses are sampled from the model, the rewards for which are then averaged and gradients are computed for first L tokens of response using MLE and remaining T-L tokens with policy gradients, with L being gradually annealed to zero (moving towards just the long-term reward).

Evaluation is done based on length of dialogue, diversity (distinct unigram, bigrams) and human studies on

1. Which of two outputs has better quality (single turn)
2. Which of two outputs is easier to respond to, and
3. Which of two conversations have better quality (multi turn).

## Strengths

- Interesting results
    - Avoids generic responses
    - 'Ease of responding' reward encourages responses to be question-like
- Adding in hand-engineereed approximate reward functions based on conversational properties and using those to fine-tune a pre-trained network using policy gradients is neat.
- Policy gradient training also encourages two dialogue agents to interact with each other and explore the complete action space (space of responses), which seems desirable to identify modes of the distribution and not converge on a single, high-scoring, generic response.

## Weaknesses / Notes

- Evaluating conversational agents is hard. BLEU / perplexity are intentionally avoided as they don't necessarily reward desirable conversational properties.

This method is based on improving the speed of R-CNN \cite{conf/cvpr/GirshickDDM14}

1. Where R-CNN would have two different objective functions, Fast R-CNN combines localization and classification losses into a "multi-task loss" in order to speed up training.
2. It also uses a pooling method based on \cite{journals/pami/HeZR015} called the RoI pooling layer that scales the input so the images don't have to be scaled before being set an an input image to the CNN. "RoI max pooling works by dividing the $h \times w$ RoI window into an $H \times W$ grid of sub-windows of approximate size $h/H \times w/W$ and then max-pooling the values in each sub-window into the corresponding output grid cell."
3. Backprop is performed for the RoI pooling layer by taking the argmax of the incoming gradients that overlap the incoming values.

This method is further improved by the paper "Faster R-CNN" \cite{conf/nips/RenHGS15}

# Object detection system overview.

https://i.imgur.com/vd2YUy3.png
 
1.	takes an input image,
2.	extracts around 2000 bottom-up region proposals, 
3.	computes features for each proposal using a large convolutional neural network (CNN), and then
4.	classifies each region using class-specific linear SVMs.
* R-CNN achieves a mean average precision (mAP) of 53.7% on PASCAL VOC 2010.
* On the 200-class ILSVRC2013 detection dataset, R-CNN’s mAP is 31.4%, a large improvement over OverFeat , which had the previous best result at 24.3%.

## There is a 2 challenges faced in object detection 
1.	localization problem
2.	labeling the data

1 localization problem :
*  One approach frames localization as a regression problem.  they report a mAP of 30.5% on VOC 2007 compared to the 58.5% achieved by our method.
* An alternative is to build a sliding-window detector.  considered adopting a sliding-window approach increases the number of convolutional layers to 5, have very large receptive fields (195 x 195 pixels) and strides (32x32 pixels) in the input image, which makes precise localization within the sliding-window paradigm.

2 labeling the data:
* The conventional solution to this problem is to use unsupervised pre-training, followed by supervise fine-tuning 
* supervised pre-training on a large auxiliary dataset (ILSVRC), followed by domain specific fine-tuning on a small dataset (PASCAL),
* fine-tuning for detection improves mAP performance by 8 percentage points. 
* Stochastic gradient descent via back propagation was used to  effective for training convolutional neural networks (CNNs)
 
##  Object detection with R-CNN
This  system consists of three modules
* The first generates category-independent region proposals. These proposals define the set of candidate detections available to our detector.
*  The second module is a large convolutional neural network that extracts a fixed-length feature vector from each region.
* The third module is a set of class specific linear SVMs.

Module design

1 Region proposals 
* which detect mitotic cells by applying a CNN to regularly-spaced square crops.
* use selective search method in fast mode (Capture All Scales, Diversification, Fast to Compute).
* the time spent computing region proposals and features (13s/image on a GPU or 53s/image on a CPU)

2 Feature extraction.
* extract a 4096-dimensional feature vector from each region proposal using the Caffe  implementation of the CNN 
* Features are computed by forward propagating a mean-subtracted 227x227 RGB image through five convolutional layers and two fully connected layers.
* warp all pixels in a tight bounding box around it to the required size
* The feature matrix is typically 2000x4096 

3 Test time detection
* At test time, run selective search on the test image to extract around 2000 region proposals (we use selective search’s “fast mode” in all experiments).
*  warp each proposal and forward propagate it through the CNN in order to compute features. Then, for each class, we score each extracted feature vector using the SVM trained for that class.
* Given all scored regions in an image, we apply a greedy non-maximum suppression (for each class independently) that rejects a region if it has an intersection-over union (IoU) overlap with a higher scoring selected region larger than a learned threshold.
## Training

1 Supervised pre-training:
 * pre-trained the CNN on a large auxiliary dataset (ILSVRC2012 classification)  using image-level annotations only (bounding box labels are not available for this data)

2  Domain-specific fine-tuning.
* use the stochastic gradient descent (SGD) training of the CNN parameters using only warped region proposals with  learning rate of 0.001.

3  Object category classifiers.
*   use intersection-over union (IoU) overlap threshold method  to label a region with The overlap threshold of 0.3.
* Once features are extracted and training labels are applied, we optimize one linear SVM per class.
* adopt the standard hard negative mining method to fit large training data in memory.

### Results on PASCAL VOC 201012

1  VOC 2010
* compared against four strong baselines including SegDPM, DPM, UVA, Regionlets. 
* Achieve a large improvement in mAP, from 35.1% to 53.7% mAP,  while also being much faster
 https://i.imgur.com/0dGX9b7.png
2 ILSVRC2013 detection.
* ran R-CNN on the 200-class ILSVRC2013 detection dataset
* R-CNN achieves a mAP of 31.4%
https://i.imgur.com/GFbULx3.png
#### Performance layer-by-layer, without fine-tuning
1 pool5 layer 
* which is the max pooled output of the network’s fifth and final convolutional layer.
*The pool5 feature map is 6 x6 x 256 = 9216 dimensional
* each pool5 unit has a receptive field of 195x195 pixels in the original 227x227 pixel input

2 Layer fc6
* fully connected to pool5
*  it multiplies a 4096x9216 weight matrix by the pool5 feature map (reshaped as a 9216-dimensional vector) and then adds a vector of biases

3 Layer fc7
* It is implemented by multiplying the features computed by fc6 by a 4096 x 4096 weight matrix, and similarly adding a vector of biases and applying half-wave rectification
#### Performance layer-by-layer, with fine-tuning
* CNN’s parameters  fine-tuned on PASCAL.
* fine-tuning increases mAP by 8.0 % points to 54.2%

### Network architectures
* 16-layer deep network, consisting of 13 layers of 3 _ 3 convolution kernels, with five max pooling layers interspersed, and topped with three fully-connected layers. We refer to this network as “O-Net” for OxfordNet and the baseline as “T-Net” for TorontoNet.
* RCNN with O-Net substantially outperforms R-CNN with TNet, increasing mAP from 58.5% to 66.0%
* drawback in terms of compute time, with in terms of compute time, with than T-Net.

1 The ILSVRC2013 detection dataset
* dataset is split into three sets: train (395,918), val (20,121), and test (40,152) 

#### CNN features for segmentation.
* full R-CNN: The first strategy (full) ignores the re region’s shape and computes CNN features directly on the warped window. Two regions might have very similar bounding boxes while having very little overlap. 
* fg R-CNN: the second strategy (fg) computes CNN features only on a region’s foreground mask. We replace the background with the mean input so that background regions are zero after mean subtraction.
* full+fg R-CNN: The third strategy (full+fg) simply concatenates the full and fg features
 https://i.imgur.com/n1bhmKo.png

_Disclaimer: I'm the first author of this paper._

The code for this paper can be found at https://github.com/fabioperez/skin-data-augmentation.

In this work, we wanted to compare different data augmentation scenarios for skin lesion analysis. We tried 13 scenarios, including commonly used augmentation techniques (color and geometry transformations), unusual ones (random erasing, elastic transformation, and a novel lesion mix to simulate collision lesions), and a combination of those. 

Examples of the augmentation scenarios:

https://i.imgur.com/TpgxzLZ.png

a) no augmentation

b) color (saturation, contrast, and brightness)

c) color (saturation, contrast, brightness, and hue)

d) affine (rotation, shear, scaling)

e) random flips

f) random crops

g) random erasing

h) elastic

i) lesion mix

j) basic set (f, d, e, c)

k) basic set + erasing (f, g, d, e, c)

l) basic set + elastic (f, d, h, e, c)

m) basic set + mix (i, f, d, e, c)

---

We used the ISIC 2017 Challenge dataset (2000 training images, 150 validation images, and 600 test images).

We tried three network architectures: Inception-v4, ResNet-152, and DenseNet-161.

We also compared different test-time data augmentation methods: a) no augmentation; b) 144-crops; c) same data augmentation as training (64 augmented copies of the original image). Final prediction was the average of all augmented predictions.


## Results

https://i.imgur.com/WK5VKUf.png

* Basic set (combination of commonly used augmentations) is the best scenario.
* Data augmentation at test-time is very beneficial.
* Elastic is better than no augmentation, but when compared incorporated to the basic set, decreases the performance.
* The best result was better than the winner of the challenge in 2017, without using ensembling.
* Test data augmentation is very similar with 144-crop, but takes less images during prediction (64 vs 144), so it's faster.

# Impact of data augmentation on dataset sizes

We also used the basic set scenarios on different dataset sizes by sampling random subsets of the original dataset, with sizes 1500, 1000, 500, 250 and 125.

https://i.imgur.com/m3Ut6ht.png

## Results

* Using data augmentation can be better than using more data (but you should always use more data since the model can benefit from both). For instance, using 500 images with data augmentation on training and test for Inception is better than training with no data augmentation with 2000 images.
* ResNet and DenseNet works better than Inception for less data.
* Test-time data augmentation is always better than not augmenting on test-time.
* Using data augmentation on train only was worse than not augmenting at all in some cases.

**Object detection** is the task of drawing one bounding box around each instance of the type of object one wants to detect. Typically, image classification is done before object detection. With neural networks, the usual procedure for object detection is to train a classification network, replace the last layer with a regression layer which essentially predicts pixel-wise if the object is there or not. An bounding box inference algorithm is added at last to make a consistent prediction (see [Deep Neural Networks for Object Detection](http://papers.nips.cc/paper/5207-deep-neural-networks-for-object-detection.pdf)).

The paper introduces RPNs (Region Proposal Networks). They are end-to-end trained to generate region proposals.They simoultaneously regress region bounds and bjectness scores at each location on a regular grid.

RPNs are one type of fully convolutional networks. They take an image of any size as input and output a set of rectangular object proposals, each with an objectness score.

## See also
* [R-CNN](http://www.shortscience.org/paper?bibtexKey=conf/iccv/Girshick15#joecohen)
* [Fast R-CNN](http://www.shortscience.org/paper?bibtexKey=conf/iccv/Girshick15#joecohen)
* [Faster R-CNN](http://www.shortscience.org/paper?bibtexKey=conf/nips/RenHGS15#martinthoma)
* [Mask R-CNN](http://www.shortscience.org/paper?bibtexKey=journals/corr/HeGDG17)

This is an interestingly pragmatic paper that makes a super simple observation. Often, we may want a usable network with fewer parameters, to make our network more easily usable on small devices. It's been observed (by these same authors, in fact), that pruned networks can achieve comparable weights to their fully trained counterparts if you rewind and retrain from early in the training process, to compensate for the loss of the (not ultimately important) pruned weights. This observation has been dubbed the "Lottery Ticket Hypothesis", after the idea that there's some small effective subnetwork you can find if you sample enough networks. 

Given these two facts - the usefulness of pruning, and the success of weight rewinding - the authors explore the effectiveness of various ways to train after pruning. Current standard practice is to prune low-magnitude weights, and then continue training remaining weights from values they had at pruning time, keeping the final learning rate of the network constant. The authors find that: 
1. Weight rewinding, where you rewind weights to *near* their starting value, and then retrain using the learning rates of early in training, outperforms fine tuning from the place weights were when you pruned 

but, also 
2. Learning rate rewinding, where you keep weights as they are, but rewind learning rates to what they were early in training, are actually the most effective for a given amount of training time/search cost 

To me, this feels a little bit like burying the lede: the takeaway seems to be that when you prune, it's beneficial to make your network more "elastic" (in the metaphor-to-neuroscience sense) so it can more effectively learn to compensate for the removed neurons. So, what was really valuable in weight rewinding was the ability to "heat up" learning on a smaller set of weights, so they could adapt more quickly. And the fact that learning rate rewinding works better than weight rewinding suggests that there is value in the learned weights after all, that value is just outstripped by the benefit of rolling back to old learning rates. 

All in all, not a super radical conclusion, but a useful and practical one to have so clearly laid out in a paper.

Here the authors present a model which projects queries and documents into a low dimensional space, where you can fetch relevant documents by computing distance, *here cosine is used*, between the query vector and the document vectors.

### Model Description

#### Word Hashing Layer
They have used bag of tri-grams for representing words(office -> #office# -> {#of, off, ffi, fic, ice, ce#}). This is able to generalize unseen words and maps morphological variation of same words to points which are close in n-gram space.

#### Context Window Vector
Then for representing a sentence they are taking a `Window Size` around a word and appending them to form a context window vector. If we take `Window Size` = 3: 

(He is going to Office -> { [vec of 'he', vec of 'is', vec of 'going'], [vec of 'is', vec of 'going', vec of 'to'], [vec of 'going', vec of 'to', vec of 'Office'] }

#### Convolutional Layer and Max-Pool layer

Run a convolutional layer over each of the context window vector (for an intuition these are local features). Max pool over the resulting features to get global features. The output dimension is taken here to be 300.

#### Semantic Layer

Use a fully connected layer and project the 300-D vector to a 128-D vector.


They have used two different networks, one for queries and other for documents. Now for each query and document (we are given labeled documents, one of them is positive and rest are negative) they compute the cosine similarity of the 128-D output vector. And then they learn the weights of convolutional filters and the fully connected layer by maximizing conditional likelihood of positive documents. 

My thinking is that they have used two different networks as their is significant difference between Query length and Document Length.
 

This paper describes a class of algorithms for classification or regression in the on-line setting.  That is, the data is a bunch of pairs $(X_t,Y_t)$ (where X may be a vector), and these data items arrive in some order: the algorithm must predict each $\hat{Y}_t$ using only the $X_t$ and previously seen pairs. In the regression setting, each mis-prediction has a loss that is like $(Y_t - \hat{Y}_t)^2$, and in the classification setting $Y_t$ is always 0 or 1 and the loss is $| Y_t - \hat{Y}_t |$.

Roughly, the algorithm makes linear predictions using some internal weight vector $(\hat{y} = w  * X)$, and does a gradient-descent like weight update. However, it tries to keep the q-norm (q can be any number) of the weight vector "small", preventing the weights themselves from becoming too large. The algorithm is actually simple, and the weight update takes advantage of link functions, which the author defines.  The majority of the paper is focused on deriving loss bounds, showing that the loss incurred by this algorithm isn't much worse than that incurred by the best weight vector, chosen in hindsight.  Typical readers will be interested in the first few pages, as the latter part of the paper is mainly technical proofs.